FO22-ATV Antenna Specifications
Electrical Specifications
Measured Gain.................15.8 dbd
E-plane 3db beamwidth.........23 deg.
H-plane 3db beamwidth.........24 deg.
Bandwidth.....................30 MHz
Sidelobe attenuation
1st E-plane.............-17.5 db
1st H-plane.............-15.5 db
VSWR..........................1.14:1 typical
VSWR (FO22-ATV)...............< 1.33:1 420-440 MHz
Front to Back ratio...........22 db
Impedance.....................50 Ohms nominal
Maximum input power...........1500 Watts
Output stacking distance
E-plane..................66 in.
H-plane..................62 in.
Mechanical Specifications
Boom length...................14 ft.
Boom mterial..................061-T6 aluminum alloy, natural finish
Boom sizes
Center section...........1" OD x 0.058" wall
End sections.............0.875" OD x 0.049" wall
Turning radius................8 ft. 6 in.
Wind survival.................90+ MPH
Wind surface area.............0.78 sq. ft.
Assembled weight..............4.5 lbs.
Element material..............3/16 in. Aluminum rod
Connector type................Waterproof N-type
Balun.........................UT141 Teflon coax
Maximum Mast size.............1.5 in.
Driven element and T-match....Brass and Copper
Element insulation............UV resistant black Delrin
Hardware......................Stainless steel
Antenna Pattern
Ordering and Contact
information is on the home page.
Last updated 1998 January 26.